Alfiplast
backing sheet is available in all board sizes or
as a 15 metre roll. The sheet is attached to the
board with supplied double-sided tape giving a
smooth surface softer than the the drawing board
surface. One side is pale green and the other
ivory to reduce glare and eyestrain. Alfiplast
protects the board and may be used to restore
the looks of an old board.
|
Transparent
Cutting Mat is designed for use with the
Bieffelux range of light boxes or on its own.
The range of self-healing and reversible mats
are 3mm thick and extra durable. Made from a
unique composite vinyl they are suitable for
rotary or straight utility blades, providing a
long-lasting non-glare surface which may be cut
and slashed without showing marks or cutting
lines. May be used as a desk mat or general
purpose work-mat. Printed grid lines include
guides for 45º & 60º angles on a
half inch grid. Available in A1, A2 and A3
sizes.
|
The
Bieffe range of Draftboards is
specifically made to give the best possible
drawing surface. Made in 19mm or 22mm thick
melamine faced board with a 3mm protective
edging.
|
FLT
full width accessory/pencil trough range
features a scooped plastic storage trough which
is to be fixed to the bottom of a drawing board
and is deep enough to accommodate pens, pencils,
markers,etc, making them readily available. The
FLT comes in a choice of lengths which may be
trimmed to suit specific requirements. They are
40mm deep and 70mm wide.
|
Swing
pencil tray is a simple swinging accessory
tray which may be suspended from two metal
fittings which can be screwed to any flat
surface.
|
Tablotte
Accessory tray screws to the side of a
drawing board. The numerous compartments are
sloped so that even with the board almost
vertical the contents will not fall out.
Designed to hold all types of pens, pencils and
drawing implements, The Tablotte even has a
penhoolder into which a damp pad may be placed
to prevent inks from drying. Tablotte may
not be used with a wire & weights
parallel motion as it would interfere with the
travel of the weights.
|
Sheet
Stop is a simple but useful strip which is
screwed to a board edge to prevent papers
slipping off an inclined surface. The stop may
be eased below the surface of the board when not
required.
|
NED316/516
electronic SCRIBER may be used independently
or mounted on a drafting machine. Thememory
retains almost 8000 characters which may be
stored in up to 50 memories, Metric or imperial,
16 resident fonts, liquid chrystal display shows
2 lines of 16 characters. The NED 316 has only
an internal memory whereas the pictired NED516
has an external memory slot as well as an
internal memory. A separate information leaflet
is available.
|
Scales
The SM and LM drafting machines are supplied
with one pair of scales. The length of the scale
will depend on the size of the drafting machine.
In addition, we offer scales in alternative
markings to fit the SM.. Special scale markings
and scales for other makes of machine may be
available. Scales may be of clear Perspex or
aluminium/ivory, depending upon
availability.
|
accessories
